|Group||Optic Fiber Distribution Box|
|Min. Order||1 piece|
|Terms of Payment||L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal|
|Adapter And Pigtail||With Or Without Is Optional|
|Application Adapter||SC/APC Or SC/UPC|
|Cable-in Way||Uncutting and Waterproof Gland|
|Installation||Wall Mounting Or Pole Mounting|
|Optional accessories||Adapters,pigtails,Heat-shrink tubes|
|Door Opening Angle||≥ 180 °|
|Application Cable||Outdoor Or Indoor|
outdoor optical cross connection cabinet is currently being widely used for cross-connecting outdoor optical cables. This cabinet offers ideal environment for fibers to be spliced and well organized under outdoor environment.
1. The cabinet has functions of cable termination, as well as fiber distribution, splice, storage and dispatch, it has good performance of resisting the open-air environment and can resist severe climatic change and serious working environment.
2. The cabinet is made from quality stainless steel. it has not only excellent performance of anit-erosion and aging resistanc but also pleasing apperance.
3. The cabinet is double-walled with the perormance of natural ventilation. holes are provided at both left and right side at the bottom of the cabinet, fascinating fiber dispatch connection betwwen front and rear.
4. The cabinet has special designed case for reducing the temperature changes inside the cabinets,which is particularly useful under extreme environments.
5. Lock provided on every cabinet ensures the safety of the fibers.
6. Cable fixing cover type that is applicable to common and ribbon optical cable can be adopted for cable reinforcement if required by user.
7. Multi-funtion -various types are available for making different combinations.
8. Disc-shaped direct splice tray(12-24 core/tray) can be used for direct splicing.
9. Accommodates SC, FC and LC ST adapters.
10. Flame-redardant material is adopted for plastic components in the cabinet.
11. All operations are fully done at front of the cabinet so as to facilitate installation, operation, construction and maintenance.
2. Technical Specifications:
1. The protection grade reaches IP65
2. Working with wavelength of 850nm, 1310nm and 1550nm.
3. Pressurization betwwen the frame high voltage protecion earth device and the frame:>3000V(DC)/1 minute without any brakdown or flashover
4. Insulation resistance betwwn the frame high voltage protetion earth device and the rame:>20,000MΩ/500V(DC)
5. Each surface of the cabinet can bear a vertical pressure over 980N
6. The outermost parts of the door can bear a vertical pressure over 200N when the door is open.
7. The fixing position of cable can bear an axial tensile force 1000N,as well as three times of recyclable torsion of +-90℃
8. Mechanical durability: No damage ofr all connectors and adaptors after 500 mating times.
9. The curvature radius>=40mm
3. Options of distribution Units(DU)
Different types of distribution units(hereafter refer as "DU") can be freely chosen to be used within the frame, the option DU are as below:
12 ports splice DU: max capacity of 12 Fc/Sc and 24LC connections.
24 ports splice DU: max capacity of 24 FC9 plastic adapter)/SC and 24 LC connections.
12 prts patch DU: no splice function
12 ports splitter DU: allocate one splitter and offers 12 slots for adapters.
Non-adapter splitter DU: allocate one splitter but with no slots for adapters.
Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.
To guarantee stable performance and provide the best products to users, our company has strict control on design,
raw material and process pursuing details and challenging perfection.
1. It is composed of case body, fiber optical splice tray and adaptor fixing frame.
2. It is devided into two parts, one links with optical cables for fusion connection between optical cable and fiber pigtail and
another links with patch cord. Combine fusion and connection, surplus fiber holding, and patch cord holding in integration.
3. Surplus fibers can be twisted around two special plastic rings, which ensure the bending radius is bigger than 40mm.
4. Adopt 6 ports adaptor fixing frame to fix adaptors which available for different types of adaptors, easy for operation and avoid any unexpected damage to fiber.
5. Cable can lead in from the bottom of the box, the entry is under the protection of special rubber parts.
ADVANCED PRODUCTION EQUIPMENT
We offer support and technical expertise in both the newest and existing technologies.
Genesis is growing rapidly. Now our company plant covers a workshop area of about 1200 square meters, with more than 500 workers.
We are dedicated to providing reliable, high-quality and cost-effective products to our new & old customers.
All fees and charges will be calculated according to weight, volume and shipping method of the materials our customers order.
Any extra charge caused by additional services, such as purchaser's carrier of special handling at the destination, must be paid by consignee of purchasers.
Telecommunications subscriber loop; Fiber to the home (FTTH); LAN/WAN; CATV.
Genesis's fiber optic cables used in metro.airport,highway.nuclear power station,Garrison,Television building,Civic centre,ect projects.
GENESIS COMPANY CONTACT:
Address: Bldg. 1, Zhongtai Industrial park, Donghuan 1st Road, Longhua New Dist.,
PHONE: +86 15112525915