|Group||Optic Fiber Distribution Box|
|Min. Order||1 piece|
|Terms of Payment||L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal|
|Adapter And Pigtail||With Or Without Is Optional|
|Application Adapter||SC/APC Or SC/UPC|
|Cable-in Way||Uncutting and Waterproof Gland|
|Installation||Wall Mounting Or Pole Mounting|
|Optional accessories||Adapters,pigtails,Heat-shrink tubes|
|Door Opening Angle||≥ 180 °|
|Application Cable||Outdoor Or Indoor|
FTTH ABS and PC Fiber Optic Distribution Box / 1*32 Way fiber optic junction box
Distribution box Type outdoor Optical Distribution Boxes is designed to connect feeder/distribution cable to subscriber's drop cable using PLC splitter in FTTx networks. It has 2 input ports and 16 output ports on the bottom and it is easy to install on the wall or pole. The rear tray is for splicing a fiber of feeder cable with PLC splitter and the front tray is for connecting subscriber's drop cable through adaptor plate on the tray.
1) Be made of high impact plastic PC/ABS
2) Can accommodate 1x8 PLC splitter and 1x16 PLC splitter
3) The high strength plastic, anti-ultraviolet radiation and ultraviolet radiation resistant, resistant to rain
4) Up to 16 FTTH drops ,2 inlet ports, 32 outlet ports
5) Wall and pole mountable
6) The design of the two-tier structure, the upper wiring layer optical splitter, lower for fiber splicing layer.
1) Widely used in FTTH access network
2) Telecommunication Networks
3) CATV Networks
4) Data communications Networks
5) Local Area Networks
Main Technical Parameters:
|Fiber Terminal Box Parameter|
|Installation||Wall Mounting or Pole Mounting|
|Protection Grade:||IP 55|
|Application Adapter||SC/APC or SC/UPC|
|Application Cable||Outdoor or indoor|
|MAX Core||32 Core|
|Adapter and Pigtail||With or Without is optional|
|Dimension||342mm x 267mmx 127mm|
|Material||ABS / PC / SMC|
|Dimensions||420mm x 320mm x 130mm (W x H x D)|
|Box door opening angle||≥180°|
|Grounding voltage level||≥3000V(DC)/10mA/1 min|
Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.
To guarantee stable performance and provide the best products to users, our company has strict control on design,
raw material and process pursuing details and challenging perfection.
1. It is composed of case body, fiber optical splice tray and adaptor fixing frame.
2. It is devided into two parts, one links with optical cables for fusion connection between optical cable and fiber pigtail and
another links with patch cord. Combine fusion and connection, surplus fiber holding, and patch cord holding in integration.
3. Surplus fibers can be twisted around two special plastic rings, which ensure the bending radius is bigger than 40mm.
4. Adopt 6 ports adaptor fixing frame to fix adaptors which available for different types of adaptors, easy for operation and avoid any unexpected damage to fiber.
5. Cable can lead in from the bottom of the box, the entry is under the protection of special rubber parts.
ADVANCED PRODUCTION EQUIPMENT
We offer support and technical expertise in both the newest and existing technologies.
Genesis is growing rapidly. Now our company plant covers a workshop area of about 1200 square meters, with more than 500 workers.
We are dedicated to providing reliable, high-quality and cost-effective products to our new & old customers.
All fees and charges will be calculated according to weight, volume and shipping method of the materials our customers order.
Any extra charge caused by additional services, such as purchaser's carrier of special handling at the destination, must be paid by consignee of purchasers.
Telecommunications subscriber loop; Fiber to the home (FTTH); LAN/WAN; CATV.
Genesis's fiber optic cables used in metro.airport,highway.nuclear power station,Garrison,Television building,Civic centre,ect projects.
GENESIS COMPANY CONTACT:
Address: Bldg. 1, Zhongtai Industrial park, Donghuan 1st Road, Longhua New Dist.,
PHONE: +86 15112525915